Skip to content

BK Home · Residential and commercial

Batteries for home and business, engineered by BK.

Residential and commercial LFP batteries for homes, shops, offices and small businesses with solar PV: they store midday sun for the evening and night, cut the electricity bill and, with the right inverter, keep the home or business running during a power cut. With the datasheet and certificates for every model.

SOC
SOC
720 × 420 mm footprint · 616 to 1,516 mm high

High voltage · stackable

BK Home Stack HV

High-voltage battery built by stacking modules on a base. A control module with display and 2 to 8 battery modules: 10.4 to 41.8 kWh per tower and up to 6 towers in parallel.

10.4–41.8kWh
Energy per tower

2 to 8 modules

6,000cycles
Service life

At 95% depth of discharge

IP66
Ingress protection rating

−15 to 50 °C, with heating

6towers
In parallel

Up to 48 modules

Capacities by number of modules

ModulesTotal energyUsable energy*Rated voltageCharge voltageCut-off voltageDimensions (L × W × H)Weight
210.44 kWh9.92 kWh102.4 V115.2 V89.6 V720 × 420 × 616 mm116 kg
315.66 kWh14.88 kWh153.6 V172.8 V134.4 V720 × 420 × 766 mm163 kg
420.88 kWh19.84 kWh204.8 V230.4 V179.2 V720 × 420 × 916 mm210 kg
526.11 kWh24.81 kWh256 V288 V224 V720 × 420 × 1,066 mm257 kg
631.33 kWh29.77 kWh307.2 V345.6 V268.8 V720 × 420 × 1,216 mm304 kg
736.55 kWh34.73 kWh358.4 V403.2 V313.6 V720 × 420 × 1,366 mm351 kg
841.77 kWh39.69 kWh409.6 V460.8 V358.4 V720 × 420 × 1,516 mm398 kg

* Tested at 25 °C at beginning of life, charge and discharge at 0.2C.

Common data

Cell
LFP 3.2 V · 102 Ah
Max. rated charge / discharge current
50 A / 50 A
Average efficiency
95 %
Recommended depth of discharge
95 %
Parallel
Up to 6 towers
Protection
Overcurrent, overvoltage, short circuit, undervoltage and overtemperature
Communication
CAN, RS485
Ingress protection rating
IP66
Operating temperature
−15 to 50 °C
Heating
51.2 V · 4 × 65 W per module
Altitude
≤ 2,000 m (derated above)
Humidity
15–85% RH, non-condensing
Installation
Stacked, floor-standing
Warranty
5 years, extendable to 10

Certificates

  • CE-EMC & RED
  • IEC 62619
  • IEC 60730
  • IEC 62477
  • IEC 62040
  • RoHS
  • IEC 60068-2-52
  • UN 38.3
  • MSDS

Safe

LFP chemistry, smart BMS and hardware protections.

Accurate

Dynamic state-of-charge calibration.

Compatible

Works with most high-voltage hybrid inverters on the market.

Easy to install

Stackable modules; expandable up to 48 modules.

660 × 390 mm footprint · 378 to 978 mm high

High voltage · compact stackable

BK Home Stack HV Compact

The compact version of the Stack HV: 102.4 V, 5.3 kWh modules that stack from just one. From 5.3 to 26.6 kWh per tower, up to 8 towers in parallel and certified to VDE 2510.

5.3–26.6kWh
Energy per tower

1 to 5 modules

6,000cycles
Service life

At 95% depth of discharge

IP66
Ingress protection rating

Discharge from −15 to 52 °C

8towers
In parallel

Up to 40 modules

Capacities by number of modules

ModulesTotal energyUsable energy*Voltage rangeRated voltageCharge voltageDimensions (L × W × H)Weight
15.32 kWh5.06 kWh89.6–115.2 V102.4 V115.2 V660 × 390 × 378 mm63 kg
210.64 kWh10.11 kWh179.2–230.4 V204.8 V230.4 V660 × 390 × 528 mm108 kg
315.97 kWh15.18 kWh268.8–345.6 V307.2 V345.6 V660 × 390 × 678 mm153 kg
421.29 kWh20.24 kWh358.4–460.8 V409.6 V460.8 V660 × 390 × 828 mm198 kg
526.62 kWh25.30 kWh448–576 V512 V576 V660 × 390 × 978 mm243 kg

* Tested at 25 °C at beginning of life, charge and discharge at 0.2C.

Common data

Cell
LFP 3.2 V · 52 Ah
Max. rated charge / discharge current
30 A / 30 A
Average efficiency
95 %
Recommended depth of discharge
95 %
Parallel
Up to 8 towers
Protection
Overcurrent, overvoltage, short circuit, undervoltage and overtemperature
Communication
CAN, RS485
Ingress protection rating
IP66
Operating temperature
Charge 0 to 52 °C · discharge −15 to 52 °C
Altitude
≤ 2,000 m (derated above)
Humidity
15–85% RH, non-condensing
Installation
Stacked, floor-standing
Warranty
5 years, extendable to 10

Certificates

  • CE-EMC-C & RED
  • IEC 62619
  • IEC 63056
  • IEC 62477
  • IEC 62040
  • VDE 2510
  • ISO 13849
  • RoHS
  • IEC 60068-2-52
  • UN 38.3
  • MSDS

Safe

LFP chemistry, smart BMS and hardware protections.

Accurate

Dynamic state-of-charge calibration.

Compatible

Works with most high-voltage hybrid inverters on the market.

Easy to install

Modules stack from just one; expandable up to 40 modules.

SOC
680 × 450 mm footprint · 765 to 1,485 mm high

High voltage · high-capacity stackable

BK Home Stack HV Max

The Stack with the most energy and power: 10.5 kWh modules with 205 Ah cells and 100 A charge and discharge. From 21 to 52.5 kWh per tower, for large homes and small businesses. Indoor or outdoor.

21–52.5kWh
Energy per tower

2 to 5 modules

100A
Charge and discharge

Rated current

6,000cycles
Service life

At 100% depth of discharge

IP66
Indoor or outdoor

Natural cooling

Capacities by number of modules

ModulesTotal energyVoltage rangeRated voltageCharge voltageDimensions (L × W × H)Weight
220.99 kWh89.6–115.2 V102.4 V115.2 V680 × 450 × 765 mm211 kg
331.48 kWh134.4–172.8 V153.6 V172.8 V680 × 450 × 1,005 mm301 kg
441.98 kWh179.2–230.4 V204.8 V230.4 V680 × 450 × 1,245 mm391 kg
552.48 kWh224–288 V256 V288 V680 × 450 × 1,485 mm481 kg

Common data

Cell
LFP 3.2 V · 205 Ah
Rated charge / discharge current
100 A / 100 A
Recommended depth of discharge
95 %
Communication
RS485, CAN
Ingress protection rating
IP66
Operating conditions
Indoor or outdoor
Operating temperature
Charge 0 to 52 °C · discharge −15 to 52 °C
Storage temperature
15 to 30 °C for more than 3 months · 0 to 45 °C for less than 3 months
Cooling
Natural
Humidity
15–85% RH, non-condensing
Installation
Stacked, floor-standing
Warranty
5 years, extendable to 10

Certificates

  • CE-EMC & RED
  • IEC 62619
  • IEC 62477
  • UN 38.3
  • MSDS

Safe

LFP chemistry, smart BMS and hardware protections.

Accurate

Dynamic state-of-charge calibration.

Compatible

Works with most high-voltage hybrid inverters on the market.

Easy to install

Up to 5 stacked modules.

Inverter 600 × 430 × 210 mm · battery modules with a 600 × 215 mm footprint

All-in-one · 48 V · single-phase

BK Home All-in-One LV

Single-phase hybrid inverter and 48 V battery in a single column: inverter on top, battery modules below. Seven power ratings from 3 to 6 kW and 5.1 to 30.7 kWh, with a backup output that switches over in under 10 ms.

3–6kW
Single-phase inverter

Seven power ratings

5.1–30.7kWh
Battery

1 to 6 × 48 V modules

< 10ms
Backup switchover

Critical-load output

IP66
Inverter and battery

Indoor or outdoor

Hybrid inverter: models

ModelBattery powerMax. PVFull MPPT rangeGrid: power / currentBackup: 10 min peakMax. efficiency
AIO LV 3K3.0 kW · 80 A4.5 kW90–500 V3.0 kVA · 14 A4.5 kVA97.6%
AIO LV 3.6K3.6 kW · 80 A5.4 kW110–500 V3.6 kVA · 17 A5.4 kVA97.6%
AIO LV 4K4.0 kW · 80 A6.0 kW120–500 V4.0 kVA · 19 A6.0 kVA97.6%
AIO LV 4.6K4.6 kW · 120 A6.9 kW130–500 V4.6 kVA · 22 A6.9 kVA98.1%
AIO LV 5K5.0 kW · 120 A7.5 kW150–500 V5.0 kVA · 23 A7.5 kVA98.1%
AIO LV 5.5K5.5 kW · 120 A8.3 kW160–500 V5.5 kVA · 26 A8.3 kVA98.1%
AIO LV 6K6.0 kW · 120 A9.0 kW170–500 V6.0 kVA · 28 A9.0 kVA98.1%

Battery: capacities by number of modules

ModulesTotal energyUsable energy*Max. charge / discharge currentDimensions (L × W × H)Weight
15.12 kWh4.87 kWh50 A / 50 A600 × 215 × 360 mm49 kg
210.24 kWh9.73 kWh100 A / 100 A600 × 215 × 680 mm95 kg
315.36 kWh14.6 kWh150 A / 150 A600 × 215 × 1,000 mm141 kg
420.48 kWh19.46 kWh160 A / 160 A600 × 215 × 1,320 mm187 kg
525.6 kWh24.32 kWh160 A / 160 A600 × 215 × 1,640 mm234 kg
630.72 kWh29.19 kWh160 A / 160 A600 × 215 × 1,960 mm280 kg

* Tested at 25 °C at beginning of life, charge and discharge at 0.2C.

Common inverter and battery data

PV input
550 V max. · MPPT 80–500 V · 2 MPPT / 2 strings · 18.5 A × 2 (short circuit 26 A × 2)
Grid
220/230 V · 50/60 Hz · power factor 0.8 lagging to 0.8 leading · THD < 3%
Backup output
220/230 V · switchover < 10 ms · 150% overload for 10 min
Efficiency
CEC 97.0% (3 to 4 kW) and 98.1% (4.6 to 6 kW) · PV to battery 98.1% · battery to AC 96.8%
Inverter protections
PV polarity, overcurrent and overvoltage, anti-islanding, AC short circuit, residual current, earth fault, insulation and PV arc-fault detection (AFCI)
Inverter
Transformerless · smart fan · −25 to 60 °C · ≤ 2,000 m · < 25 dB · standby consumption < 10 W · 25 kg · wall-mounted
Communication
LCD, LED, RS485, CAN, Wi-Fi, GPRS, 4G · SunSpec rapid shutdown (RSD)
Battery
LFP · 51.2 V nominal (44.8–57.6 V) · max. charge 57.6 V · 95% depth of discharge · CAN and Wi-Fi
Battery temperature
Charge 0 to 50 °C · discharge −15 to 50 °C · natural cooling
Battery heating
Optional, 130 W per module
Ingress protection rating
IP66 (inverter and battery)
Humidity
Inverter 0–100% · battery 15–85% RH non-condensing
Installation
Stacked · indoor or outdoor
Warranty
5 years, extendable to 10

Inverter certificates

  • CE-EMC
  • EN 50549-1/10
  • DNV-SE-0124
  • G99

Battery certificates

  • CE-EMC & RED
  • IEC 62619
  • IEC 60730
  • IEC 62040
  • RoHS
  • IEC 60068-2-52
  • UN 38.3
  • MSDS

All-in-one

Inverter, charger, backup switchover and batteries in one modular system.

Safe

IP66, three-level protection (cell, module and system), arc detection and 150% overload for 10 minutes.

Easy to install

Modular plug-in design; expandable up to 30.72 kWh.

Remote management

Dynamic state-of-charge calibration, ready for rapid shutdown and virtual power plants, plus app and cloud monitoring.

Inverter 600 × 432 × 210 mm · battery modules with a 600 × 210 mm footprint

All-in-one · high voltage · three-phase

BK Home All-in-One HV

Three-phase hybrid inverter and high-voltage battery in a single column. Eight power ratings from 3 to 15 kW and 9.2 to 23 kWh, with a three-phase backup output that switches over in under 10 ms. For large homes and small businesses with a three-phase supply.

3–15kW
Three-phase inverter

Eight power ratings

9.2–23kWh
Battery

2 to 5 modules of 4.6 kWh

< 10ms
Backup switchover

Three-phase critical-load output

98.3%
Maximum efficiency

97.5% European

Three-phase hybrid inverter: models

ModelBattery powerBattery rated voltageMax. PVFull MPPT rangeRated / max. AC outputBackup: 60 s peakMax. efficiency
AIO HV 3K3 kW150 V5 kW200–850 V3 kW / 3.3 kVA3,300 VA98.0%
AIO HV 4K4 kW200 V6 kW200–850 V4 kW / 4.4 kVA4,400 VA98.0%
AIO HV 5K5 kW200 V7.5 kW200–850 V5 kW / 5.5 kVA5,500 VA98.0%
AIO HV 6K6 kW250 V9 kW250–850 V6 kW / 6.6 kVA6,600 VA98.0%
AIO HV 8K8 kW300 V12 kW300–850 V8 kW / 8.8 kVA8,800 VA98.2%
AIO HV 10K10 kW350 V15 kW500–850 V10 kW / 11 kVA11,000 VA98.2%
AIO HV 12K12 kW450 V18 kW500–850 V12 kW / 13.2 kVA13,200 VA98.3%
AIO HV 15K15 kW500 V22.5 kW500–850 V15 kW / 16.5 kVA16,500 VA98.3%

Battery: capacities by number of modules

ModulesTotal energyUsable energy*Voltage rangeRated voltageDimensions (L × W × H)Weight
29.21 kWh8.75 kWh112–144 V128 V600 × 210 × 895 mm100 kg
313.82 kWh13.13 kWh168–216 V192 V600 × 210 × 1,180 mm141 kg
418.43 kWh17.51 kWh224–288 V256 V600 × 210 × 1,465 mm182 kg
523.04 kWh21.89 kWh280–360 V320 V600 × 210 × 1,750 mm223 kg

* Tested at 25 °C at beginning of life, charge and discharge at 0.2C.

Common inverter and battery data

PV input
1,000 V max. · 620 V nominal · MPPT 150–850 V · start-up 160 V · 2 MPPT / 2 strings · 20 A × 2 (short circuit 30 A × 2)
Battery port
80–600 V · 30 A max. · 3-stage charging curve · compatible with lithium and sodium batteries
Grid
230/400 V · 50/60 Hz · power factor 1 (adjustable from −0.8 to 0.8) · THD < 3%
Backup output
230/400 V · 50/60 Hz · THD < 3% with linear load · switchover < 10 ms
Efficiency
European 97.5% · max. 98.0 to 98.3% · battery charge and discharge 98.0%
Inverter protections
Reverse polarity, overcurrent and overvoltage, anti-islanding, AC short circuit, leakage current, earth fault and grid monitoring
Inverter
Transformerless · natural convection (3–6 kW) or smart fan · −25 to 60 °C · < 4,000 m · < 40 dB · standby consumption < 5 W · 25 kg
Communication
LCD, LED, RS485, CAN, Wi-Fi, GPRS, 4G
Battery module
LFP · 4.60 kWh (4.37 kWh usable) · 64 V (56–72 V) · 30 A · 600 × 210 × 285 mm · 41 kg
Battery
30 A charge and discharge · 95% depth of discharge · CAN, RS485 · natural cooling
Battery temperature
Charge 0 to 52 °C · discharge −15 to 52 °C
Ingress protection rating
IP66 (inverter and battery)
Installation
Stacked · indoor or outdoor
Warranty
5 years, extendable to 10

Inverter certificates

  • CE-EMC
  • IEC 62109
  • IEC 62477
  • EN 50549-1/10
  • IEC 62116
  • IEC 61727
  • C10/11

Battery certificates

  • CE-EMC
  • IEC 62619
  • IEC 60730
  • IEC 62040
  • IEC 60068-2-52
  • UN 38.3
  • MSDS

All-in-one

Inverter, charger, backup switchover and batteries in one modular system.

Safe

IP66, three-level protection (cell, module and system) and arc detection.

Easy to install

Modular plug-in design; expandable up to 23.04 kWh.

Remote management

Dynamic state-of-charge calibration, ready for rapid shutdown and virtual power plants, plus app and cloud monitoring.

5 kWh · wall or floor

SOC

10 and 16 kWh · on wheels

From 640 × 420 × 161 mm (5 kWh) to 780 × 690 × 230 mm (16 kWh), height × length × width

48 V cabinets · wall, floor or on wheels

BK Home Wall 48

51.2 V LFP batteries in a metal cabinet, for low-voltage hybrid inverters. Five models from 5.2 to 16.1 kWh: the 5 kWh units hang on the wall or stand on the floor, and the 10 and 16 kWh units sit on 360° swivel wheels.

5.2–16.1kWh
Energy per cabinet

Five models

51.2V
Rated voltage

44.8–57.6 V

IP66
Indoor or outdoor

Four of the five models

6
Cabinets in parallel

Up to 2 for the Wall 48 16

Models

ModelTotal energyUsable energy*CapacityRated charge and discharge currentProtection and operationInstallationDimensions (H × L × W)WeightMax. parallel
Wall 48 5 IP665.22 kWh4.96 kWh102 Ah50 A (1P) · 100 A (2P) · 150 A (3P) · 160 A (4–6P)IP66 · indoor or outdoorWall or floor680 × 480 × 180 mm44 kg6
Wall 48 55.22 kWh4.96 kWh102 Ah50 A (1P) · 100 A (2P) · 150 A (3P) · 160 A (4–6P)IP20 · indoorWall or floor640 × 420 × 161 mm44 kg6
Wall 48 1010.49 kWh9.97 kWh205 Ah100 A (1P) · 160 A (2–6P)IP66 · indoor or outdoorFloor-standing, on wheels670 × 430 × 232 mm87 kg6
Wall 48 10 CEI10.49 kWh10.49 kWh205 Ah100 A (1P) · 160 A (2–6P)IP66 · indoor or outdoorFloor-standing, on wheels730 × 530 × 230 mm96 kg6
Wall 48 1616.07 kWh16.07 kWh314 Ah150 A (1P) · 160 A (2P)IP66 · indoor or outdoorFloor-standing, on wheels780 × 690 × 230 mm120 kg2

* Tested at 25 °C at beginning of life, charge and discharge at 0.2C.

Certificates by model

ModelCertificates
Wall 48 5 IP66CE-EMC · IEC 62619 · IEC 60730 · IEC 62040 · UN 38.3 · MSDS
Wall 48 5CE-EMC & RED · IEC 62619 · UN 38.3 · MSDS
Wall 48 10CE-EMC & RED · IEC 62619 · UN 38.3 · MSDS
Wall 48 10 CEICE-EMC & RED · IEC 62619 · CEI 0-21 · UN 38.3 · MSDS
Wall 48 16CE-EMC & RED · IEC 62619 · IEC 60730 · IEC 62040 · IEC 60068-2-52 · UN 38.3 · MSDS · SATS 5398

Common data

Chemistry
LFP · 51.2 V nominal (44.8–57.6 V) · max. charge 57.6 V
Depth of discharge
95% recommended (usable energy of each model in the table)
Charge temperature
0 to 55 °C (Wall 48 10 CEI: 0 to 52 °C)
Discharge temperature
−15 to 55 °C (Wall 48 10 CEI: −15 to 52 °C)
Heating
Optional: 130 W on the 5 and 10 kWh models · 150 W on the Wall 48 16
Humidity
15–85% RH non-condensing
Cooling and enclosure
Natural · metal cabinet
Communication
CAN, RS485 and Wi-Fi
Protection
Overcurrent, overvoltage, short circuit, undervoltage and overtemperature
Warranty
5 years, extendable to 10

Certificates common to all five models

  • IEC 62619
  • CE-EMC
  • UN 38.3
  • MSDS

Wall or wheels

5 kWh units hang on the wall or stand on the floor; 10 and 16 kWh units move on 360° swivel wheels.

Expandable

Up to 6 cabinets in parallel (2 for the Wall 48 16).

Integrated BMS

Protection against overcurrent, overvoltage, short circuit, undervoltage and overtemperature.

Connected

CAN and RS485 for the inverter and Wi-Fi for monitoring.

440 × 450 × 148 mm module · 46 kg

Low voltage · 48 V · rack

BK Home Rack 48

48 V, 4.8 kWh rack-format module for low-voltage hybrid inverters. Stacks on the floor and grows in parallel up to 16 modules: around 78 kWh. For indoor installation.

4.89kWh
Energy per module

4.65 kWh usable

16modules
In parallel

Up to 78 kWh

6,000cycles
Service life

At 95% depth of discharge

IP20
Indoor

Natural cooling

Parallel capacities (module values × number of modules)

ModulesTotal energyUsable energy*Charge / discharge currentWeight
14.89 kWh4.65 kWh50 A / 80 A46 kg
29.78 kWh9.30 kWh100 A / 100 A92 kg
419.56 kWh18.60 kWh100 A / 100 A184 kg
839.12 kWh37.20 kWh100 A / 100 A368 kg
1678.24 kWh74.40 kWh100 A / 100 A736 kg

* Tested at 25 °C at beginning of life, charge and discharge at 0.2C.

Common data

Cell
LFP 3.2 V · 102 Ah
Rated voltage
48 V
Max. charge voltage / cut-off voltage
54 V / 42 V
Rated charge current
50 A (single module) · 100 A (in parallel)
Rated discharge current
80 A (single module) · 100 A (in parallel)
Average efficiency
95 %
Recommended depth of discharge
95 %
Protection
Overcurrent, overvoltage, short circuit, undervoltage and overtemperature
Communication
RS485, CAN
Ingress protection rating
IP20
Operating temperature
Charge 0 to 55 °C · discharge −15 to 55 °C
Cooling
Natural
Altitude
≤ 2,000 m (derated above)
Humidity
5–95%, non-condensing
Enclosure
Metal, black
Installation
Floor-standing
Warranty
5 years, extendable to 10

Certificates

  • CE-EMC & RED
  • IEC 62619
  • RoHS
  • UN 38.3
  • MSDS

Safe

LFP chemistry, smart BMS and hardware protections.

Accurate

Dynamic state-of-charge calibration.

Compatible

Works with most 48 V hybrid inverters on the market.

Expandable

Up to 16 modules in parallel.

Do you distribute or install batteries for homes and businesses?

We will send you the BK Home distribution price list and help you choose the right battery for every home, every business and every inverter.